|
Features |
|
| |
|
|
Low Operating Costs |
Less compression to operate and maintain. |
| |
|
|
Feed Pretreatment |
CO2 removal is not necessary, glycol injection
for dehydration is adequate. |
| |
|
|
Wide Pressure Range |
250 to 1,200 psig feeds without inlet gas
compression. |
| |
|
|
High Ethane Recovery |
One pass ethane recovery can exceed to
96%. |
| |
|
|
NGL Flexibility |
One-line switching from high C2-plus to high C3-plus with simple controls. |
| |
|
|
Inexpensive Metallurgy |
Lowest temperature, limited by C3
refrigeration, permits the use of carbon steel metallurgy
predominantly. |
| |
|
|
Upgrading Refrigeration Plants |
Add-on unit enhances propane recoveries from
typical 30-55% to 96+% by processing cold separator gases. |
| |
|
|
HD-5 Propane |
Solvent regenerator can be designed to
additionally produce HD-5 propane product, along with the
fractionated C3-C4 mix and C5+ products. |
|
|
|
|
Upgrading Lean Oil Plants |
Reduce operating costs and increase recovery
with minimal changes. |
ADVANCED
EXTRACTION
TECHNOLOGIES,
INC.